Hitachi SEM Mount Storage Box with M4 Screws

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Hitachi SEM Mount Storage Box with M4 ScrewsDESCRIPTION for Hitachi scanning electron microscopy specimen mounts 15 25mm Hitachi Mount Holder, metal screws and Box This storage box accepts threaded Hitachi Mounts. Holds either 12 each of 15mm or 6 each of 25mm mounts. Insert in base of the box has 12 M4 screws. Maximum specimen height for 6mm high Hitachi SEM mounts is 12mm with closed lid. #16712 holding 12 each 15mm Hitachi mounts metal screws hold mounts #16712 holding 6 each 25mm Hitachi

The carbon support layer lying over the holes is less than 3nm in thickness and is the thinnest support film available

For Bruker's Dimension SPMs

The soft and elastic handles are made of NBR vulcanized nitrile rubber and have a low surface resistivity of 108 – 109 Ohm

Dimensions/Retainers

suitable for SEM and FESEM

This optional certified NIST traceable step height calibration standard provides high accuracy

stainless steel shaft and a magnetic pad on the tip

The wafers are packed and shipped in a wafer carrier

and on the end

Multilayer structure with PbO / BaF2 and Sb2O3 particles

16148-30 - PELCO SEMClip™

(Normal temperature for standard high temperature glue guns is in the 190° to 210°C / 374° to 410°F range)